Contents:
However, to maximise safety your unit should have its own RCD. Do not allow children to play around the hook-up installation or supply cable or allow them to connect or disconnect supplies. At Club Sites the supply cable plug is simply a push fit into the bollard socket, but you will find some sites with hook-ups that require the plug to be pushed in and then twisted.
With this type of hook-up a button has to be pressed to release the supply cable plug. Your connecting lead will need a plug to match this socket outlet and a connector to match the inlet to your unit, both complying with BS EN It is common however to find lesser cables where each core is only 1. This can be confirmed on the outer PVC covering of the cable where it should be marked. The maximum cable length of 25 metres should ensure it can reach the supply bollard at most sites in the UK.
Always uncoil the supply cable fully to avoid it overheating on a cable reel. The use of a second cable is not recommended, but if it is used it must be fitted with the same BS EN standard plug and connector. The connection between the two cables should be raised off the ground by the use of a propriety joining cover. A surface mounted inlet fitted within a flush fitting box.
You do not need an existing account in order to use this service. We will always help you to have Mains v Inlet Flush Fitting.
Basically you need a hole cut out of approx 90mm. Width of back of box: Hole Cut out required.
Flush Fitting Mains Inlet Square. External lid spring loaded.
Accepts standard 13A plug. Flush Fitting Mains Inlet - Beige.
Distance for hole centres is 60mm from screw hole to screw hole. Flush fitting external mains inlet socket white.
Please note that items sent directly from the supplier will need to be ordered by 3pm for collection two days later. All delivery times will be shown during checkout. You can buy this product from one of our carefully selected Approved Partners.
Good look suitable and fit do or it's use. There are two cable sets: Exterior plugs and sockets A selection of exterior plugs and sockets for use with your caravan or. Caravan v plugs and sockets. Contact Us We're available to chat 7 days a week: Delivery times are Monday to Saturday.
The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready. Checkout is always via halfords.
In checkout the products will be split into separate deliveries for each supplier. Some of the parts we sell here at Halfords have been reconditioned.
These will carry a Refundable Deposit or an extra surcharge amount. When you add one of these reconditioned items to your basket, we'll add this extra cost automatically. Once you've sent us your old item we'll check it over, and then refund you the full surcharge as long as everything is ok. Before you return your old unit please make sure it's in re-serviceable condition.
So if you're returning caliper casings, you'll need to double check they aren't badly damaged or broken. If the part you've sent is found to be unserviceable, we reserve the right not to refund the surcharge.
Mains Hook Up Inlet Socket - Caravan / Motorhome / Campervan Flush Fitting Mains Hook up Socket inlet Male with cover, Camper van, Caravan, Motorhome. BS For connection from site electricity socket to caravan mains inlet socket or a mains adaptor. We also sell plugs, couplers and hook up adaptors to .
Please note that if you're returning your old unit to our National Returns Centre then this will be at your own expense. It seems like you're not logged in. Once you've logged in or signed Up, you'll be able to pop this item into your Wish List. To get the best possible experience on our site you should use latest version of Chrome, Firefox or Internet Explorer. We use cookies to personalise content, to provide social media features and to analyse website traffic.